產品列表
聯系我們       CONTACTS
  C、Z型鋼壓瓦機系列
   
  設備生產工藝流程Working flow:上料——開料進板(將帶鋼正確引入主機)——校平——滾壓成型——沖孔——成型切斷
   相關信息
 
    產品介紹
 
一、設備生產工藝流程Working flow:
上料——開料進板(將帶鋼正確引入主機)——校平——滾壓成型——沖孔——成型切斷
Decoiling the sheet guiding-coil strip leveling-roll forming-punching for horizontal hole-punching for vertical hole-measure length-cutting the panel-panels to the supporter.
二、主機Host
1.軸直徑為¢70材質為45#
Shaft diameter: ¢70Material quality:45#
2.滾壓模具為鍛打經車床加工而成表面鍍硬鉻可壓制板子厚度0.8mm-3mm模具材質Gr15.
C purlin mainly use hot roll steel strip or hot dip galvanized steel strip at thickness 0.8mm-3mm.
Material of roller die:Gr15 bearing steel with quenched treatment.
3.切斷沖孔:液壓剪切沖孔(材質Gr12淬火HRC60-62).
Material of cutting die:Gr12 mould steel with quenched treatment
4.主機功率:11KW的擺線減速機.
Main motor power:11kw
5.液壓站電機功率:5KW
Hydraulic station power:5KW
6.傳動:2寸鏈條傳動.
Driving mode: 2 inch chain drive
7.中板厚度:20mm
Moderato thickness: 20mm
8.軸承型號:6213
Bearing model:6213
9.設備外形尺寸:長80000mm*寬1200mm*高1500mm
Fixing dimensions:80,000mm*1,200*1,500
10.本機器為13道軸輥壓
Quantity of stands: 13 groups
11.PLC控制
Controlling system: PLC